ConnecticutInsurance Appraiser

Free calculator

Roof Square and Pitch Converter

Measurement errors are one of the most common reasons roof claims come up short, especially on steep Connecticut colonials. Convert your footprint into true squares and compare.

Roof square & pitch converterCheck the square count
Measurement method
Steep 9/12–12/12 roofs are common on Connecticut colonials and capes.
Roof squares (before waste)0
Pitch multiplier1.000
Roof surface area0
Squares to order (with waste)0
Bundles—
Rough replacement cost—
Difference vs. carrier’s squares—

For planning only. Results depend on the figures you enter and your policy’s terms. They are not a quote, an appraisal or legal advice.

How the math works

A pitched roof has more surface than the footprint under it. The pitch multiplier is √(1 + (rise ÷ 12)²). A 6/12 roof is about 11.8% larger than its footprint; a 9/12 roof is 25% larger; a 12/12 roof is about 41.4% larger.

Checking your estimate

  • Find the roofing section of the carrier’s estimate and note the total squares and waste percentage.
  • Enter the carrier’s squares in the last field to see the difference instantly.
  • Look for steep-roof charges (often from 7/12 up) and high-roof charges for two-story walls.
  • Check that starter, ridge cap, drip edge, ice-and-water shield and valley metal are listed.

Limits of a footprint calculation

Roofs with several pitches, dormers and valleys should be measured plane by plane. A field measurement or aerial report always beats a footprint estimate. Use this as a sanity check.

Questions about this tool

What’s a roofing square?

100 square feet of roof surface. Many Connecticut colonials have roughly 18 to 35 squares.

Why is ice-and-water shield important here?

Connecticut’s building code generally requires an ice barrier at the eaves when a roof is replaced, so it belongs in a replacement estimate.

More free tools

Want a professional to check the numbers?

Send your estimate and we’ll review it line by line.

Call nowFree review